SETU Talk phone is a small Internet Phone device. It offers full duplex, high quality and low-latency voice conversation on Internet. It will save you up to 95% of your long-distance/international phone bill. It is the Internet Phone appliance with the latest technology that provides both Setu Talk to Setu Talk and Setu Talk to regular phone capabilities via Internet.

There is no need to have a computer while calling with Setu Talk. The Setu Talk has its own internal processor and plugs directly into the phone. The dot matrix LCD will guide your setting at the beginning. The set up time is less than 3 minutes. It is controlled with four large functions buttons, and monitors the call status on Bakelite. When calling a party who is also equipped with this technology, the call is free immediately transferred to the Internet. If not, the call will travel through an established Gateway providJer for a "very low" service rate and will come in right over the regular telephone.

If the party you wish to call is equipped with an Setu Talk, you may first dial the phone number as you normally would. Either calling or answering person presses the "O.K." button on Setu Talk and the call will be switched to the Internet automatically.

Ring Trigger Mode Be sure the answering party has turned on the Setu Talk phone. Use phone book to execute this Mode. (Refer to user manual)

Vtel Mode Both calling and answering parties shall connect to Internet first. Pick up the phone handset and press button on Setu Star to search "By Vtel". Input 10 digit ID number and press # on the phone handset and it will be connected.

Setu Talk to Regular Phone Mode (50%-95% Discount)

Setu Talk has the ability to communicate with other Internet Telephony products, like Digital

Setu Talk LAN, Setu Talk Net, Setu Talk Web, Setu Talk Gateway 88, Setu Talk

Gateway 168 and Setu Talk Gateway 8000 With an active SetuTalk account, you can call all the covered areas of compatible ITSP with low service rates. In this mode, the receiver doesn't need an Setu Talk phone.

Setu Talk to NetMeeting (PC)

Both calling and answering party should be on Internet first. Pick up the phone handset and press button on Setu Talk to search "By IP". Input IP number of the answering PC and press # on the phone handset and it will be connected.

All-in-One Design (No Computer Needed)

Setu Talk possesses its own processor and modem; it works intelligently. User can use without the computer, no software and no long-distance carriers are required. The answering party has option to either receive by regular phone or by PC.

User-Friendly Interface (No Technician Needed)

With a backlit LCD display and four buttons, Setu Talk is extremely easy to use and configure. Smart setup program makes your Setu Talk ready to go in three minutes. You can monitor all the system status from the LCD panel clearly.

Clear Voice Quality (Digital Technology)

Setu Talk state-of-the-art compression technology is fully industry standard compliant. Incorporated with advanced echo cancellation algorithm an ultra-low latency jitter control, Setu Talk delivers the best voice quality to users.

Automatic On-line Upgrade (Future Protection Against Obsolesce)

The design of Setu Talk is highly flexible. More and more functions will be added into your Setu Talk via automatic on-line upgrade capability. This ensures you to enjoy the latest Internet Telephony technologies at no charge.

Setu Talk Lan

Setu Talk Lan is an Ethernet phone device. The Setu Talk works with existing Internet connection or any TCP/IP networks (such as ADSL, Cable modem, Internet leased line) using Ethernet connection. Setu Talk LAN is also an H.323 ready product.

• Setu Talk to any phone
• Setu Talk to Setu Talk (Free)
• Build-in Full-duplex Speakerphone
• Dot Matrix LED Indicator
• Normal Mode for calling as usual
• Firmware upgrade via the Internet
• Ring-Trigger Mode for saving the initial long distance call
• Compatible with standard Internet Service Providers
• You to call your Home/Office Telephone

Standards & Protocols

• V.34bis
• MNP2-10: Error Correction & Data Compression
• ITU-T V.42/V.42bis: Error Correction/Data Compression
• G.723.1: Full Duplex Voice Compression
• TCP/IP: Internet Communication Protocol
• PPP: Connection to Internet Provider

• 9VAC (AC Power transformer supplied)
• Power consumption (max.): 8 watts
• Operating voltage (AC Adapter): 110VAC
• Operating frequency (AC Adapter):

• POTS (Plain Old Telephone Service): RJ-11
• Transmission speed (max.): 33.6Kbps (V.34bis)

• Temperature Operating: 32 to 108F (0 to 42¢XC)
• Storage: -100 to 176F (-40 to 80C)
• Operating: 15% to 80%
• Storage: 10% to 90%
• Humidity

• FCC Part68 compliant
• FCC Part15, Class B compliant
• CE
• CTR21